Measuring and test instrument for testing the effectiveness of protective measures at stationary electrical installations after completion, repair or expansion, and for periodic testing (DGUV regulation 3)
Phase Sequence Indicator
Phase Sequence Indicator
Peak power measuring instrument and characteristic curve tracer for photovoltaic systems
Test instrument for PV modules and strings per DIN EN 62446 (VDE 0126-23)
Test instrument for electric charging stations
Voltage, Phase, and Continuity Tester plus Phase Sequence Indicator for up to 690 V AC/DC per DIN EN 61243-3:2011 / VDE 0682-401
Voltage Tester with Moving Coil Level Indicator
Communication tester between the charging station and the electric vehicle
Test instrument for testing the effectiveness of protective measures in electrical installations per IEC 60364-6, machines and systems per IEC 60204-1, low-voltage switchgear and controlgear assemblies per DIN EN 61439-1, PV systems per DIN EN 62446-1 and electric charging stations per DIN EN 61851-1.
Voltage and Continuity Tester
Voltage and Continuity Tester
Digital TRMS Voltage Tester with Resistance/Frequency Range
Installation board – “sub-distribution branch with installation circuits” – for fault simulation for measurements per IEC 60364.6 and EN 50110 (DIN VDE 0100-600, 0105-100)
Adapter for standards-compliant testing of single and 3-phase, mode 2 and 3 charging cables with simulation of faults in accordance with DIN VDE 0701-0702 and the manufacturer’s specifications
Installation board – “service line with main ground bus” – for fault simulation for testing the effectiveness of protective measures for measurements in accordance with IEC 60364.6 and EN 50110 (DIN VDE 0100-600, 0105-100)
Test adapter for electric charging stations (single-phase, type 1) for PROFITEST
Test adapter for electric charging stations (single/3-phase, type 2) for PROFITEST
Measuring and test instrument for testing the effectiveness of protective measures at stationary electrical installations after completion, repair or expansion, and for periodic testing (DGUV regulation 3)
Loop resistance measuring instrument
currently not available
Measuring and test instrument for testing the effectiveness of protective measures at stationary electrical installations after completion, repair or expansion, and for periodic testing (DGUV regulation 3)
Insulation measuring instrument
Installation board – “service line with main ground bus” – for fault simulation for testing the effectiveness of protective measures for measurements in accordance with IEC 60364.6 and EN 50110 (DIN VDE 0100-600, 0105-100)
Installation board – “sub-distribution branch with installation circuits” – for fault simulation for measurements per IEC 60364.6 and EN 50110 (DIN VDE 0100-600, 0105-100)
Test Instrument for Testing per DIN VDE 0701-0702
Test instrument with standards-compliant test sequences for testing the electrical safety of devices after repair and for periodic testing including IZYTRONIQ data processing software
Test Instrument for Testing per DIN VDE 0701-0702 with Data Memory
Test Instrument for Testing per DIN VDE 0701-0702 - with CEE Sockets
Test instrument with standards-compliant test sequences for testing the electrical safety of devices after repair and for periodic testing including IZYTRONIQ data processing software
Test instrument with standards-compliant test sequences for testing the electrical safety of devices after repair and for periodic testing including IZYTRONIQ data processing software
Test instrument with standards-compliant test sequences for testing the electrical safety of devices after repair and for periodic testing including IZYTRONIQ data processing software
Test Instrument with Standards-Compliant Test Sequences according EN 62353, EN 61010, EN 60335, EN 60950, optional EN 60601, GOST R (ГОСТ Р) 60601, VDE 0701-0702 for Testing the Electrical Safety of Devices, in Particular After Repair or in Production
Test instrument for testing the effectiveness of protective measures in electrical installations per IEC 60364-6, machines and systems per IEC 60204-1, low-voltage switchgear and controlgear assemblies per DIN EN 61439-1, PV systems per DIN EN 62446-1 and electric charging stations per DIN EN 61851-1.
Test Instrument for Insulation, Low-resistance and Voltage Measurements – A Successful Entry into Premium Class
Test Instrument for Insulation, Low-resistance and Voltage Measurements
High-precision earthing and low-resistance measuring instrument with GPS
Test Instrument for Insulation, Low-resistance and Voltage Measurements
Analog Insulation Measuring Instrument / Low-Resistance Measuring Instrument / Voltmeter with Buzzer
High-precision earthing and low-resistance measuring instrument
Test Instrument for Insulation, Low-resistance and Voltage Measurements - with Memory
Analog Test Instrument for Insulation, Low-resistance and Voltage Measurements
Battery Powered Earth Tester with Measurement of Soil Resistivity
5000 V Insulation Measuring Instrument, Digital
Insulation measuring instrument
Multimeter with Interturn Short-circuit Detection and Insulation Test
TRMS Multimeter with Insulation Measurement for Service Technicians, ±30,000 Digits
Digital, Low-Value Resistance Measuring Instrument
Milliohmmeter, Multimeter and Data Logger, Temperature Meter
Milliohmmeter for Use in Potentially Explosive Atmospheres
Installation board – “service line with main ground bus” – for fault simulation for testing the effectiveness of protective measures for measurements in accordance with IEC 60364.6 and EN 50110 (DIN VDE 0100-600, 0105-100)
Installation board – “sub-distribution branch with installation circuits” – for fault simulation for measurements per IEC 60364.6 and EN 50110 (DIN VDE 0100-600, 0105-100)
Adapter for standards-compliant testing of single and 3-phase, mode 2 and 3 charging cables with simulation of faults in accordance with DIN VDE 0701-0702 and the manufacturer’s specifications
Measuring and test instrument for testing the effectiveness of protective measures at stationary electrical installations after completion, repair or expansion, and for periodic testing (DGUV regulation 3)
Test instrument with standards-compliant test sequences for testing the electrical safety of devices after repair and for periodic testing including IZYTRONIQ data processing software
currently not available
Measuring and test instrument for testing the effectiveness of protective measures at stationary electrical installations after completion, repair or expansion, and for periodic testing (DGUV regulation 3)
Measuring and test instrument for testing the effectiveness of protective measures at stationary electrical installations after completion, repair or expansion, and for periodic testing (DGUV regulation 3)
Test instrument with standards-compliant test sequences for testing the electrical safety of devices after repair and for periodic testing including IZYTRONIQ data processing software
Communication tester between the charging station and the electric vehicle
Test instrument for electric charging stations
currently not available
Measuring and test instrument for testing the effectiveness of protective measures at stationary electrical installations after completion, repair or expansion, and for periodic testing (DGUV regulation 3)
Test adapter for electric charging stations (single/3-phase, type 2) for PROFITEST
Test adapter for electric charging stations (single-phase, type 1) for PROFITEST
